Platinum     Home
	*NC8P-16      Medium weight forged  platinum circle necklace.  If you like hammered platinum jewelry, this necklace is a spectacular example.  16 inches long.   NC8G-05A  As above, but made in 14kt yellow gold .
	*S11X3P   Forged platinum three part ring.  Three separately forged platinum bands are welded  together to make one band.  These bands are individually made and vary slightly in design due to variations in thickness from forging. About 8mm wide, platinum 10% iridium.    *S11X3E   Is a similar ring in18kt yellow gold.
	*S114P   Forged platinum ring,  heavier than the S11 rings shown above, about 3mm wide.  It is made by welding and forging platinum (10% iridium) wire on two planes, varied in cross-section.  This is a flat band, not  curved like the S11.         gold version *S114G   is the gold version, 14kt
*GR5P   Forged asymmetrical band platinum 10% iridium           See gold rings *RS2P   Cast  in platinum  5% iridium                   See gold rings                          *RS12P   Cast in Platinum 5% ruthenium                       See gold rings      *SC4P    Carved scroll 4mm platinum 10% iridium                 See gold rings
Platinum diamond rings
*DR79    SC4P  Carved scroll 4mm band platinum 10% iridium, set with 8 tiny diamonds total weight 0.24ct (GIA grade G-H/VS)            See gold  rings *DR102   Forged asymmetrical platinum 10% iridium band set with 0.50ct diamond    (GIA grade F/VS1)      ---available with different diamonds.     See gold rings
	*DR96  Diamond and platinum forged ring. This ring is made from forged platinum, 10% iridium, curved  to hold a setting. The diamond is 1.01ct (GIA grade G/VS2)     -- available with a different diamond. This ring is quite adaptable and can be made for larger and smaller stones such as emerald, ruby. sapphire, tourmaline, amethyst. The price would vary depending on the cost and size of each stone.  Please inquire.                                                        *DR81  is the same R89G design in 14kt yellow gold set with a 2.10ct natural champagne color diamond (GIA grade VVS2)
	*SR51   Cabochon cut sapphire and platinum 10% iridium ring.  The sapphire weighs 1.89 carats, is from Sri Lanka, and is probably heat treated.  It is set on a 5mm lightly hammered band.    Other stones, ring widths and sizes can be used.  The price would depend upon the stone and the ring size and width.  Please inquire.
Platinum earrings
	Forged platinum, made from 1 piece, 10% iridium hoop earrings for pierced ears are in 3 sizes           Price includes platinum earring nuts. *E73P-05A    1" diameter         *E73P-05B  1 1/8" diameter                       *E73P-05C   1 1/4" diameter    *E73G-05A   and other sizes in 14kt          yellow gold
*E2P     Three petal earrings, platinum 10% iridium SOLD              See gold earrings *E6P-A   Small shell earrings, platinum 5% ruthenium            See gold earrings *E12EP  Platinum 10% iridium & 18kt combined  SOLD           See gold earrings *E53P-A   Platinum hammered ball studs, 6mm             See gold earrings *E70P-05   Hammered circle earrings, about 1/2" diameter, platinum 10% iridium       See gold earrings *D3P  heavy forged dangle earrings, in platinum, 10%  iridium           See gold earrings       *DE83   Small flowers in platinum 5% ruthenium (same as E25E-A) set with 6 tiny diamonds tw 0.18ct (GIA grade G-H/VS)  SOLD            See gold earrings *DE98   Star earrings in  platinum 10% iridium set with tiny diamonds tw 0.19ct (G-H/SI)
Platinum bracelets *B7P-08    Forged link bracelet, platinum 10% iridium, heavy weight, 7 1/2" long             See gold bracelets *B13P-08    Platinum 10% iridium forged bangle, medium weight         See gold  bracelets *B29P-11    Platinum 10% iridium  forged open cuff, medium weight    See gold  bracelets *P22P-08    Light forged circle pin in platinum 10% iridium          See gold pins
Home